TERMINATION BAR
DESCRIPTION
TERMINATION BAR is a multi-purpose, preformed,
professional way to attach a wide variety of
construction waterproofing, drainage boards, and
flashing systems.
TERMINATION BAR is a high strength, plastic
strip designed to support vertical membrane
systems at their termination point. This plastic
composite is ultraviolet resistant, will not rust, and
is non-conductive for additional jobsite safety. Each
10’ strip has pre-drilled holes for easy installation.
USES
TERMINATION BAR provides an excellent,
professional looking solution for top terminations
with below-grade waterproofing membranes and/or
drainage board systems whenever backfilling
operations may be delayed. (May be used as an
installation option with MEL-ROL®, AIR-SHIELD™, PROTECTION COURSE, and MEL-DRAIN™ systems.)
With the added flexibility provided by pre-drilled
holes every 6”, cavity wall flashing materials can
now be properly installed with confidence. Our
unique, trapezoidal design provides a reservoir for
caulks/mastics at the top termination.
| RELATED MEADOWS PRODUCTS |
PROTECTION COURSE
MEL-ROL
AIR-SHIELD
MEL-DRAIN
POINTING MASTIC |
No. 712
No. 714
No. 718
No. 719
No. 740 |
| FEATURES/BENEFITS |
- Pre-fabricated, ready to use/Cost effective.
- Made of special, high strength plastic/Adapts to building wall irregularities.
- Pre-drilled holes every 6”/Anchors a variety of material widths.
- Trapezoidal design/Provides trough for caulks or mastic beads.
- Non-corrosive/Will not rust.
- Provides neat looking terminations/Professional appearance.
|
LEED INFORMATION
May help contribute to LEED credits: |
- IEQ Credit 3.1: Construction Indoor Air
Quality Management Plan – During
Construction
- MR Credit 2: Construction Waste Management
- MR Credit 4: Recycled Content
- MR Credit 5: Regional Materials
|
| TECHNICAL DATA |
- Length: 10' (Holes every 6" o/c,
2" in from either end)
- Pieces/carton: 25 pieces (250 LF/carton)
- Color: White
- Weight per carton: 20 lb.
|
APPLICATION
Install TERMINATION BAR at the top edge of
the material to be supported. If a sealant material
is to be used at the top of the termination, place
the narrow side of the trapezoidal design against
the wall to form a reservoir for the sealant
material. TERMINATION BAR is easily scored
and cut to fit field dimensions. Use pre-drilled
holes as necessary, with appropriate mechanical
or power-actuated fasteners.
This material last updated November 2009.
Top
|
(800) 342-5976
