 |
PRODUCT DATA: DECK-O-TREAT - #780
|
|
DECK-O-TREAT
Gunite/Shotcrete Curing Aid & Hardener
DESCRIPTION
DECK-O-TREAT is a gunite/shotcrete curing aid
specially formulated to provide the contractor
with a good, general purpose curing aid for
construction applications where economy is of
prime importance. It contains no wax, resin or
solvent. DECK-O-TREAT meets maximum VOC
content limits of 100 g/L as required by SCAQMD Rule 1113.
USES
DECK-O-TREAT is ready to use and aids in
curing gunite and shotcrete. Surfaces treated with
DECK-O-TREAT can later be covered by
additional finishes, such as paint, tile adhesive or
plaster. DECK-O-TREAT can be used on both
horizontal and vertical surfaces.
| FEATURES/BENEFITS |
- Penetrates to aid curing, as well as to harden, in one easy application.
- Ready to use.
- Can receive additional treatments … paint, tile
adhesive or plaster.
- Tint aids in identifying coverage
- Can be spray-applied to horizontal or vertical
surfaces.
- VOC compliant ... actual VOC content is 0 g/L.
|
| SPECIFICATIONS |
- Meets 100 g/L maximum VOC content allowed by SCAQMD Rule 1113.
- Gunite/shotcrete properly treated with DECK-O-TREAT is USDA accepted.
|
PACKAGING
5 Gallon (18.93 L) Pails
55 Gallon (208.20 L) Drums |
| TECHNICAL DATA |
- DRYING TIME … Depends on weather conditions and coverage; typically dries in one hour.
- FLASH POINT … >212° F.
|
|
|
APPLICATION
Preparation... Application equipment must be
clean and free of any previously used materials.
Mixing…For optimum performance, gentle mixing
or agitation is recommended.
Application Method... Apply DECK-O-TREAT as
soon as any surface water has disappeared and the
surface is dry to the touch. Apply one even coat
with a pressure hand sprayer or paint roller.
COVERAGE
GUNITE/SHOTCRETE: 200 ft.²/gal.
(18.58 m²/L)
Cleanup... Application equipment may be cleaned easily with soap and water while still wet.
PRECAUTIONS
DO NOT DILUTE. Do not apply if the temperature of
the treated surface is less than 40º F (4º C). KEEP
FROM FREEZING. If frozen, product should be
thawed and agitated lightly prior to use. If DECK-O-TREAT
is accidentally sprayed or spilled on glass,
brick, aluminum, painted surfaces, etc., flush immediately with water. Do not over-apply.
HEALTH HAZARDS
This product will not support combustion. Read and
follow application information and use in accordance
with the Health and Safety Information shown on the label.
Refer to Material Safety Data Sheet for complete health and safety information.
October 2007
A DIVISION OF W. R. MEADOWS®
P.O. BOX 397 HAMPSHIRE, IL 60140 PHONE: 800-542-POOL (7665) FAX:
847-214-2268
LIMITED
WARRANTY
"DECK-O-SEAL®, A Division of W. R. MEADOWS, INC., warrants
at the time and place we make shipment, our material will be of
good quality and will conform with our published specifications
in force on the date of acceptance of the order." Read complete
warranty. Copy furnished upon request.
Disclaimer
The information contained herein is included for illustrative
purposes only, and to the best of our knowledge, is accurate and
reliable. DECK-O-SEAL cannot however under any circumstances make
any guarantee of results or assume any obligation or liability
in connection with the use of this information. As DECK-O-SEAL
has no control over the use to which others may put its product,
it is recommended that the products be tested to determine if
suitable for specific application and/or our information is valid
in a particular circumstance. Responsibility remains with the
architect or engineer, contractor and owner for the design, application
and proper installation of each product. Specifier and user shall
determine the suitability of products for specific application
and assume all responsibilities in connection therewith. |
(800) 342-5976
