Product Data Sheet
32 12 13.16 |
DATA SHEET 2900-1180 |
1180 SS-1 Primer
Asphalt Primer
DESCRIPTION
1180 SS-1 PRIMER is an emulsified asphalt, containing selected fillers, designed for use as a tack coat for cold and hot mix patching. It is cold-applied.
USES
1180 SS-1 PRIMER is a cold-applied tack coat to be used when patching asphalt. It can be used in conjunction with both hot- and cold-applied patching compounds when a more adhesive bond is needed.
FEATURES/BENEFITS
- Can be used with both hot- and cold-applied compounds.
- Creates a more adhesive bond.
- Cold-applied.
PACKAGING
18.9 L (5 U.S. Gal.) Pails
205 L (54.2 U.S. Gal.) Drums
1000 L (265 U.S. Gal.) Totes*
*Lightweight Disposable Tote System
COVERAGE
Coverage rate is approximately 2.45 m²/L. (100 ft². /gal.)
SHELF LIFE
When stored indoors in original, unopened containers at temperatures between 4° – 32° C, optimum performance and best use is obtained within two years of date of manufacture.
TECHNICAL DATA
Colour: | Black | |
Saybolt Viscosity: | @ 25º C | min. 20 |
Residue from distillation: | % by mass | min. 60% |
Penetration | @ 25º C | 105 |
APPLICATION
Surface Preparation … Remove all loose material from area to be primed.
Mixing … Stir thoroughly before using.
Application Method … Apply 1180 SS-1 PRIMER by broom or spray to repair areas. Make sure edges of repair are primed. Let 1180 SS-1 PRIMER become tacky before applying cold or hot mix.
Clean Up … Use water to clean up fresh material. Dried material may be cleaned up with mineral spirits.
PRECAUTIONS
DO NOT FREEZE. Minimum application temperature is 10º C. Do not use if there is a possibility of rain. Refer to Safety Data Sheet for complete health and safety information.
MASTERFORMAT NUMBER AND TITLE
32 12 13.16 – Asphaltic Tack Coats
LEED INFORMATION
May help contribute to LEED credits:
- MRc9: Construction and Demolition Waste Management
2017-11