FIBRE-PATCH OV is a one-component, add water only, hydraulic cement based, polymer-modified and silica-fume enhanced, fibre-reinforced mortar. The polymer-modification allows…
Concrete Restoration
SPECTRUM RE-KOTE BF
SPECTRUM RE-KOTE BF is a single-component, polymer-modified, rapid-hardening, cementitious concrete repair mortar designed for the renovation and resurfacing of deteriorated…
MEADOW-PATCH SMOOTH-GRADE
MEADOW-PATCH SMOOTH-GRADE is a single-component, polymer-modified, cement-based, sands-free material used for achieving an ultra-smooth finish on precast, cast-in-place, tilt-up or…
CG-86 DOT
CG-86 DOT construction-grade grout is a non-gaseous, non-shrink economical grout. It was specifically developed as a high strength, cost-effective, general-purpose…
FLOOR-TOP STG PRIMER
FLOOR-TOP STG PRIMER is a high solids, undiluted surface treatment primer to be used with FLOOR-TOP STG standard traffic grade,…
SPECTRUM RE-KOTE TF
SPECTRUM RE-KOTE TF is a single-component, polymer-modified, rapid-hardening, cementitious concrete repair mortar designed for the renovation and resurfacing of deteriorated…
REZI-WELD 3/2
REZI-WELD 3/2 grout-patch is a moisture-insensitive, two-component epoxy kit for grouting, sealing base plates, and patching concrete. Part A, the…
FUTURA-45 EXTENDED
FUTURA-45 EXTENDED is a one-component, shrinkage-compensated, proprietary blend of cements, aggregates, and performance-enhancing chemical additives. This rapid setting concrete is…
FUTURA-45
FUTURA-45 is a one-component, cementitious, rapid-hardening structural repair mortar designed for horizontal applications. FUTURA-45 is composed of selected cements, graded…
FUTURA-15
FUTURA-15 is a one-component, cementitious, very rapid-hardening, structural repair mortar designed for horizontal applications. FUTURA-15 is composed of selected cements,…
REZI-WELD LV STATE
REZI-WELD LV STATE is an ultra-low viscosity, two-component, 100% solids, rapid setting, epoxy-based, structural injection resin. It is a solvent-free,…
REZI-WELD LV
REZI-WELD LV low viscosity injection epoxy is a moisture insensitive, very low viscosity, high modulus, high strength, structural injection resin.…
REZI-WELD GEL PASTE STATE
REZI-WELD GEL PASTE STATE is a high viscosity, high modulus, rapid-setting, thixotrophic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection gel.…
REZI-WELD GEL PASTE
REZI-WELD GEL PASTE is a high viscosity, rapid setting, thixotrophic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection resin. REZI-WELD GEL…
POLY-GRIP
POLY-GRIP is a two-component, styrene-free, acrylic system used for anchoring and doweling applications in uncracked concrete using threaded rod and…
EG-96 HP
EG-96 HP is a three component, 100% solids, VOC and BGE1 free, epoxy resin system designed specifically for pours from…
SPEED-E-ROC
SPEED-E-ROC is a pourable, rapid setting and hardening, high strength, hydraulic cement compound designed for anchoring and grouting. SPEED-E-ROC has…
MEADOW-PLUG
MEADOW-PLUG is a specially blended, extremely fast setting, hydraulic cement product designed to instantly stop running water or fluid seepage…
CG-86 N.E. (Northeast U.S.)
CG-86 N.E. construction-grade grout is a non-gaseous, non-shrink economical grout. It was specifically developed as a high strength, cost-effective, general-purpose…
CG-86
CG-86 construction-grade grout is a non-metallic, mineral aggregate based, non-shrink economical grout. The product is specifically developed as a high-strength,…
1428 HP
1428 HP is a hydraulic-cement-based, precision, non-shrink, load-bearing grout having an extended working time up to 30 minutes under fluid…
588-10K
588-10K is a hydraulic-cement-based, precision, non-shrink, load-bearing grout designed to transfer load effectively and safely, ensuring long service time of…
PAC-IT
PAC-IT packable grout is a non-ferrous, non-shrink grout specifically formulated for grouting applications, without the need for expensive form work.…
FLOOR-TOP STG
FLOOR-TOP STG is a standard traffic-grade, single-component, shrinkage-compensated, self-leveling floor topping and underlayment that may be pumped or poured. FLOOR-TOP…
REZI-WELD FLEX
REZI-WELD FLEX is a gray, two-part, pourable consistency, premium-grade, moisture-insensitive, epoxy joint filler formulation. When cured, it is semi-rigid, with…
REZI-WELD 1000
REZI-WELD 1000 is a medium-viscosity, two-component, construction-grade structural epoxy adhesive. It is moisture-insensitive and resistant to many chemicals.
INTRALOK
INTRALOK bonding agent is a high solids, water-based emulsion admixture suitable for modifying Portland cement compositions. It is also designed…
MEADOW-PATCH 20
MEADOW-PATCH 20 is a one-component, cementitious, fast setting restoration/repair mortar. This product has a light gray color and is designed…
MEADOW-PATCH 5
MEADOW-PATCH 5 is a one component, cementitious, very fast setting restoration/repair mortar and water plug. This product has a light…
MEADOW-CRETE GPS
MEADOW-CRETE GPS is a one-component, trowel- or pneumatically-applied (wet process), migrating-corrosion-inhibitor enhanced, polymer-modified, shrinkage-compensated, fiber-reinforced, micro-silica enhanced, cementitious repair mortar…
MEADOW-CRETE FNP EXTENDED
MEADOW-CRETE FNP EXTENDED is a one-component, pre-extended, shrinkage-compensated repair mortar for structural repairs and reinstatement of concrete elements. The product…
MEADOW-CRETE FNP
MEADOW-CRETE FNP is a one-component, flowable, shrinkage-compensated, corrosion inhibitor enhanced repair mortar for structural applications. MEADOW-CRETE FNP can be formed…
MEADOW-PATCH T2
MEADOW-PATCH T2 is a two-component, polymer-modified, cementitious concrete resurfacer and repair mortar.
MEADOW-PATCH T1
MEADOW-PATCH T1 is a one-component, polymer-modified, cementitious repair mortar designed for horizontal, vertical, and overhead applications. This all-purpose mortar is…