Product Data Sheet
Data Sheet No. 7900-303
|
DECK-O-SEAL
Two-Part, Elastomeric, Polysulfide-Based Joint Sealant
DESCRIPTION
DECK-O-SEAL two-part, polysulfide-based joint sealant is a premium-grade, pourable, self-levelling sealant. It is a non-staining sealant that cures at an ambient temperature to a firm, flexible, tear-resistant rubber. DECK-O-SEAL is highly resilient and has excellent recovery characteristics after extended periods of compression or elongation. DECK-O-SEAL has outstanding resistance to most chemicals, to all weather conditions, aging and shrinkage.
USES
DECK-O-SEAL is ideal for sealing joints on swimming pool decks subject to movement. It is applicable for both interior and exterior use.
FEATURES/BENEFITS
- Highly resilient with excellent recovery characteristics.
- Provides a uniform seal.
- Prevents uncontrolled cracking by allowing expansion and contraction during temperature changes
- Stays flexible … won’t become brittle or crack due to ultraviolet exposure.
- Resists abrasion, weathering, and moisture … elevated temperatures will not cause discolouration.
- Not affected by today’s pool chemicals.
- Retains joint soundness in service once it’s cured and can be stretched or compressed up to 25%.
PACKAGING
Patented, pre-measured, two-component unitized, easy-to-handle package contains proper ratio of base to setting agent, which must be maintained. 2.8 L (96 oz.) base material can, setting agent, stirring paddle and applicator are all included. 0.71 L (24 oz.) unitized packaging kits are also available. NOTE: Applicator bottle is not included in the 0.71 L (24 oz.). kits.
COVERAGE
Approximate quantity which can be sealed with a 2.8 L (96 oz.) DECK-O-SEAL Kit.
WIDTH OF JOINT
Mm (in.) |
6 mm (1/4″) |
9 mm (3/8″) |
12 mm (1/2″) |
16 mm (5/8″) |
19 mm (3/4″) |
22 mm (7/8″) |
25 mm (1″) |
6 (1/4″) |
70.4 m (231″) |
46.9 m (154′) |
32.3 m (106′) |
28.0 m (92′) |
23.5 m (77′) |
20.1 m (66′) |
17.7 m (58′) |
9 (3/8″) |
31.1 m (102′) |
23.5 m (77′) |
18.9 m (62′) |
15.5 m (51′) |
13.4 m (44′) |
11.6 m (38′) |
|
12 (1/2″) |
17.7 m (58′) |
14.0 m (46′) |
11.6 m (38′) |
10.1 m (33′) |
8.8 m (29′) |
SPECIFICATIONS/STANDARDS
- CRD-C-506, Type I, Classes A & B
- ASTM C920, Type M, Grade P, Class 25, NT
- Federal Spec A-A-1556A, Type M, Grade P, Class 25, NT
SHELF LIFE
One year from date of manufacture. Store unopened product in a cool, dry place under 27° C.
TECHNICAL DATA
Consistency | Liquid Self-Leveling |
Application Life @ 25° C & 50% R.H. |
1 Hour |
Tack-Free Time | 4 Hours |
Linear Shrinkage | Negligible |
Shore Hardness | Shore A 20 ± 5 |
Tensile Strength | 0.86 – 1.38 MPa (125 – 200 psi) |
Elongation | 500% |
Peel Adhesion (Per ASTM C794) Plate Glass, Aluminum, Concrete |
357 g/mm (20 lb./in.) min |
Application Temperature Range | 4° – 50° C |
All technical data is typical information, but may vary due to test methods, conditions and operators.
Dura-White, Stone Gray, Desert Tan (Black, Redwood, and custom colours available by special order)
APPLICATION
Follow these instructions carefully for maximum effectiveness. BE SURE TO WEAR PROTECTIVE SAFETY GLASSES AND CHEMICAL-RESISTANT GLOVES.
Surface Preparation … Remove foreign substances, incompressibles and free water from joint opening. For proper adhesion, joints must be clean and dry. Dust, dirt, and laitance should be removed prior to application. Concrete should be completely cured and free from all foreign materials and contamination from curing agents. (Industry accepted standard for curing is 28 days.) To maintain cleanliness around the joint to be sealed, apply masking tape 50.8 mm (2″) wide to the surfaces adjoining both sides of the joint before REZI-WELD™ LV from W. R. MEADOWS and/or DECK-O-SEAL is applied.
Priming … DECK-O-SEAL adheres well to unprimed concrete; however, REZI-WELD LV is recommended for optimum adhesion.
Joint Sizes … Proper joint design practices and application techniques must be followed for successful performance. DECK-O-FOAM®, KOOL-ROD™, or KOOL-ROD SOFT from W. R. MEADOWS may be used as a joint backing material to control sealant depth and provide proper joint configuration. For larger joints, use a non-asphalt joint filler, such as CORK EXPANSION JOINT from W. R. MEADOWS, in the joint before sealing.
A 2:1 width-to-depth ratio should be maintained. However, in no case should joint sealant depth be less than 6.4 mm (1/4″) or exceed 12.7 mm (1/2″). DECK-O-SEAL should NOT be used in joints less than 6.4 mm (1/4″) wide
Mixing … DECK-O-SEAL is supplied in pre-measured kits with a ratio of setting agent to base, which must be maintained. Store and mix in a cool, shaded area. Do not mix until ready to use. (Product cannot be re-sealed for future use.)
De-rim both cans with a can opener. Mix small can (setting agent) first, then pour into larger can. Pour the setting agent into the base and mix slowly. To aid in proper mixing, scrape material from the sides and bottom of the container until a uniform colour is obtained. Continue mixing for a recommended 10 minutes, minimum. A slow-speed drill can be used. Care must be taken to ensure that all setting agent is thoroughly blended with the base component. Avoid trapping air in the sealant.
Application Method … At 25º C and 30% relative humidity, the application life is approximately one hour. Apply thoroughly blended material with supplied squeeze bottle, 2.8 L (96 oz. kits only), caulking gun, or any other suitable applicator. Be sure to remove masking tape from both sides of joint before the sealant starts to set. DECK-O-SEAL will set firm and rubbery within 24 hours at 25° C. At lower temperatures, curing time may take longer.
Cleanup … Application equipment should be cleaned promptly with xylene or toluene.
PRECAUTIONS
DECK-O-SEAL is not compatible with asphalt and cannot be used in asphalt concrete pavement or with asphalt-impregnated expansion joint fillers. NOTE: It is not recommended to apply paint over DECK-O-SEAL products. DECK-O-SEAL cannot be used underwater. DECK-O-SEAL 125 or DECK-O-SEAL GUN GRADE should be used in joints under the waterline. For underwater applications, see current DECK-O-SEAL 125 and DECK-O-SEAL GUN GRADE data sheets for recommendations and application information.
MASTERFORMAT NUMBER AND TITLE
07 92 13 – Elastomeric Joint Sealants
13 11 00 – Swimming Pools
2024-02
A DIVISION OF W. R. MEADOWS®