Product Data Sheet
|32 12 13.16||
DATA SHEET 2900-1180
1180 SS-1 Primer
1180 SS-1 PRIMER is an emulsified asphalt, containing selected fillers, designed for use as a tack coat for cold and hot mix patching. It is cold-applied.
1180 SS-1 PRIMER is a cold-applied tack coat to be used when patching asphalt. It can be used in conjunction with both hot- and cold-applied patching compounds when a more adhesive bond is needed.
- Can be used with both hot- and cold-applied compounds.
- Creates a more adhesive bond.
18.9 L (5 U.S. Gal.) Pails
205 L (54.2 U.S. Gal.) Drums
1000 L (265 U.S. Gal.) Totes*
*Lightweight Disposable Tote System
Coverage rate is approximately 2.45 m²/L. (100 ft². /gal.)
When stored indoors in original, unopened containers at temperatures between 4° – 32° C, optimum performance and best use is obtained within two years of date of manufacture.
|Saybolt Viscosity:||@ 25º C||min. 20|
|Residue from distillation:||% by mass||min. 60%|
|Penetration||@ 25º C||105|
Surface Preparation … Remove all loose material from area to be primed.
Mixing … Stir thoroughly before using.
Application Method … Apply 1180 SS-1 PRIMER by broom or spray to repair areas. Make sure edges of repair are primed. Let 1180 SS-1 PRIMER become tacky before applying cold or hot mix.
Clean Up … Use water to clean up fresh material. Dried material may be cleaned up with mineral spirits.
DO NOT FREEZE. Minimum application temperature is 10º C. Do not use if there is a possibility of rain. Refer to Safety Data Sheet for complete health and safety information.
MASTERFORMAT NUMBER AND TITLE
32 12 13.16 – Asphaltic Tack Coats
May help contribute to LEED credits:
- MRc9: Construction and Demolition Waste Management