Product Data Sheet
|07 72 00|
DATA SHEET 7500-625
625 PLASTIC CEMENT
All-Purpose Asphalt Mastic
625 PLASTIC CEMENT is a solvent cutback, fibrated, asphalt mastic that forms a tough, flexible, water-resistant coating.
625 PLASTIC CEMENT is designed as a general utility cement for filling and sealing joints in concrete, masonry, wood, or metal building construction; or for sealing flashings, skylights, and parapet walls; and for repairing leaks and cracks of all types.
- Forms a tough, flexible
- Can be used in a variety of applications.
When stored indoors in original, unopened containers at temperatures between 4° – 32° C, optimum performance and best use is obtained within two years of date of manufacture.
4 Kg. Pails
10 Kg. Pails
20 Kg. Pails
Coverage will vary depending on usage.
Complies with CAN/CGSB-37.5-M89. To be applied according to CGSB 37-GP-11M.
11.5 lbs/gal (1.15 kg/L)
|8 hours average|
4°F (-20°C) Minimum
|Water Content||1% maximum|
|Flash Point||104°F (43°C)|
Surface Preparation … Surface shall be firm and free from loose particles, cracks, grease, oil, and other foreign matter. Surface must be free from frost, snow, and ice.
Application Method … Apply by knife, trowel, or glove. Single coatings should not be more than 6 mm (1/4″) thick.
Cleanup … Use mineral spirits for cleanup.
Contains flammable solvents. KEEP AWAY FROM HEAT AND OPEN FLAME. Use in a well-ventilated area. Avoid use where solvent odours are objectionable. If material has thickened due to low temperatures, leave the containers in a heated building overnight. DO NOT HEAT WITH AN OPEN FLAME.
MASTERFORMAT NUMBER AND TITLE
07 00 00 – Thermal and Moisture Protection
May help contribute to LEED credits:
- MRc9: Construction and Demolition Waste Management