Product Data Sheet
03 15 00 |
DATA SHEET 3300-135 |
DECK-O-FOAM®
Expansion Joint Filler
DESCRIPTION
DECK-O-FOAM expansion joint filler is a flexible, lightweight, non-staining, polyethylene, closed-cell expansion joint filler. It is a chemical-resistant, ultraviolet stable, non-absorbent, low-density, cost-effective, compressible foam that offers an extended service life in both interior and exterior applications.
DECK-O-FOAM is supplied with a convenient, pre-scored removable strip to provide a uniform sealing reservoir in the joint. It also serves as a sealant bond-breaker and provides a cost-effective alternative as an expansion joint in all concrete paving projects. It is compatible with all currently available cold-applied sealants.
USES
DECK-O-FOAM is ideal for use as an expansion, contraction, and/or isolation joint in swimming pool decks, curb and gutter works, floor slabs, pavement patch repair, sidewalks, driveways, plazas, parking decks, highways, and airport runways.
FEATURES/BENEFITS
- Pre-scored strip is easily removed.
- Economical alternative to expansion joints.
- Controls amount of sealant needed and acts as a bond breaker.
- Eliminates costly sawing and routing.
- Flexible, lightweight, and can be formed around curved objects.
- Easy to install.
- Can be used in interior or exterior applications.
PACKAGING (Standard Size Rolls)
6.4 mm x 76.2 mm x 30.5 m (¼” x 3″ x 100′) 20 rolls/bale
6.4 mm x 101.6 mm x 30.5 m (¼” x 4″ x 100′) 15 rolls/bale
6.4 mm x 152.4 mm x 30.5 m (¼” x 6″ x 100′) 10 rolls/bale
6.4 mm x 203.2 mm x 30.5 m (¼” x 8″ x 100′) 7 rolls/bale
6.4 mm x 1.22 m x 30.5 m (¼” x 48″ x 100′) 1 roll/bale
12.7 mm x 76.2 mm x 15.2 m (½” x 3″ x 50′) 20 rolls/bale
12.7 mm x 88.9 mm x 15.2m (½” x 3½” x 50′) 17 rolls/bale
12.7 mm x 101.6 mm x 15.2 m (½” x 4″ x 50′) 15 rolls/bale
12.7 mm x 127 mm x 15.2 m (½” x 5″ x 50′) 12 rolls/bale
12.7 mm x 152.4 mm x 15.2 m (½” x 6″ x 50′) 10 rolls/bale
12.7 mm x 203.2 mm x 15.2 m (½” x 8″ x 50′) 7 rolls/bale
12.7 mm x 1.22 m x 15.2 m (½” x 48″ x 50′) 1 roll/bale
Standard stock sizes – other sizes available on special order.
SPECIFICATIONS
- ASTM D 4819, Type II
TECHNICAL DATA
TEST METHOD | TYPICAL VALUE | |
Density | ASTM D 1622 | 32.04 kg/m³ (2.0 lb./ft.³) |
Compression 10% Deflection |
ASTM D 3575 | 69 KPa (10 psi) max. |
80% Deflection | ASTM D 3575 | 862.49 KPa (125 psi) max. |
Tensile Strength | ASTM D 3575 | 379.50 KPa (55 psi) |
Water Absorption | ASTM D 3575 | 0.5% volume max. |
Temperature Stability | N/A | -40° to 71° C (-40°F – 160° F) |
These physical properties are typical, but should not be used in specifying material due to differences that could result from variations in testing methods.
APPLICATION
Attach the DECK-O-FOAM securely to the existing concrete slab, coping, or form with tape or mechanical fasteners prior to pouring the next slab. Make sure that DECK-O-FOAM is level with the desired slab surfaces before finishing. If specifications require the use of a cold-applied sealant, remove the pre-scored strip and apply the sealant following the manufacturer’s instructions.
MASTERFORMAT NUMBER AND TITLE
03 15 00 – Concrete Accessories
LEED INFORMATION
May help contribute to LEED credits:
- MR Credit 2: Construction Waste Management
- MR Credit 5: Regional Materials
2014-09