Product Data Sheet
|07 92 13||DATA SHEET NO. 4708-000|
One-Part, Self-Leveling, SMP-Based Sealant
HS-1 SL is a one-part, self-leveling hybrid sealant, developed with silyl-modified polymer (SMP) technology. It cures under the influence of atmospheric moisture to form a medium modulus sealant with excellent adhesive properties and resistance to ageing and weathering.
HS-1 SL can be used in movement and contraction joints. Ideal applications include indoor and outdoor pool decks subject to pedestrian traffic.
- One part – no mixing is needed on site.
- Supplied in convenient pouches – no tooling or caulk gun needed.
- Pouch can be resealed.
- Allows movement capability of 25%.
- Cures bubble-free.
- Adheres to green concrete and damp surfaces.
- Adheres well to most construction materials.
- Is permanently elastic over a wide range of temperatures.
- Resists chlorinated water splashes.
946.4 mL (32 Oz.) Pouches (6/Carton)
[Approximate number of lineal meters (lineal feet) that can be sealed with 946.4 L (32 Oz.) HS-1 SL pouch.]
|Width of Joint|
|Depth of Joint||6.4 mm (1/4″)||9.5 mm (3/8″)||12.7 mm (1/2″)||15.9 mm
|6.4 mm (1/4″)||1956 mm
|9.5 mm (3/8″)||867 mm
|12.7 mm (1/2″)||483 mm
One year from date of manufacture. Store unopened product in a cool, dry place under 27° C.
|Available Colours:||Grey, Tan|
|Skin-Time:||15 – 30 Minutes|
|Tack-Free Time:||45 – 90 Minutes|
|Cure Time:||6.4 mm (1/4″) bead per 24 hours|
Times listed above may vary depending on temperature and humidity during and after application.
Surface Preparation … Surfaces must be clean, free of oil, grease or rust and of sound quality. Remove all loose particles or residues with a jet of compressed air, sandpaper, or hard brush. Glass, metal, and other non-porous surfaces must be free of any coatings and wiped clean with solvent.
Priming … For optimum adhesion and/or joints over 25.4 mm (1″) in width, REZI-WELD™ LV from W. R. MEADOWS is recommended.
Joint Sizes … Proper joint design practices and application techniques must be followed for successful performance. DECK-O-FOAM®, KOOL-ROD™, or KOOL-ROD SOFT from W. R. MEADOWS may be used as a joint backing material to control sealant depth and provide proper joint configuration. For larger joints, use a non-asphalt joint filler, such as CORK EXPANSION JOINT from W. R. MEADOWS, in the joint before sealing.
A 2:1 width-to-depth ratio should be maintained. However, in no case should joint sealant depth be less than 6.4 mm (1/4″) or exceed 12.7 mm (1/2″). HS-1 SL should NOT be used in joints less than 6.4 mm (1/4″) wide.
Cleanup … Clean tools with solvent or alcohol immediately after use. Cured material can only be removed mechanically.
Do not use in underwater applications. Do not use in joints less than 6.4 mm (1/4″) wide and/or 6.4 mm (1/4″) (6.4 mm) deep.
MASTERFORMAT NUMBER AND TITLE
07 92 13 – Elastomeric Joint Sealants