USA
Français
Español
International
Reinforcing Fabric NW is a non-woven polymeric reinforcing fabric. It is specifically designed to reinforce the Cem-Kote Flex materials in applications over dynamic (moving) cracks. It can also be used with Flex-Top RM roof and Tuff-Flex wall coatings manufactured by Gemite Products Inc.
Data Sheets
Product Data Sheet
| 07 16 13 |  |
REINFORCING FABRIC NW®
Waterproof Reinforcing Fabric
FEATURES
- Superior Alkali Resistance
- Waterproof
- Lightweight
- Highly Flexible
- Non-toxic
- Non-Allergenic
- Superior Impact Strength
- Economical
DESCRIPTION
Basic Use
Reinforcing Fabric NW is a non-woven polymeric reinforcing fabric. It is specifically designed to reinforce the Cem-Kote Flex materials in applications over dynamic (moving) cracks. It can also be used with Flex-Top RM roof and Tuff-Flex wall coatings manufactured by Gemite Products Inc.
Composition and Materials
Reinforcing Fabric NW is made of a high quality polymeric fiber with superior durability, resistance to alkali and UV resistance. It contains, integrally embedded, a tough polymer foil, which provides the waterproofing under water head pressure.
Limitations
One layer of Reinforcing Fabric NW alone will provide waterproofing up to 30.6 meters (100 ft.) of water head pressure.
Health and Safety
Reinforcing Fabric NW is non-toxic and non- allergenic. Keep product out of reach of children. FOR INDUSTRIAL USE ONLY. Consult MSDS for additional information.
Colour
White
Packaging
Reinforcing Fabric NW is available in rolls of 12 cm (4″) and 100 cm (40″) wide and each roll is 50 m (164 ft.) long.
Yield
The yield of the roll is 50 linear meters (164 ft.). The actual yield will be lower due to overlaps.
Storage and Transportation
Reinforcing Fabric NW, stored in dry and cool area, has a 1 year shelf life. Protect against sunlight.
TECHNICAL DATA
| Value | Imperial Units | S.I. Units |
| Construction | Non-Woven | |
| Breaking Load Long (G.P.20.2-89) | 26 lbs/in | 69 N/15 cm |
| Extension at Break Long (G.P.20.2-89) | 140% | 140% |
| Breaking Load Lateral (G.P.20.2-89) | 17 lbs/in | 45 N/15 mm |
| Extension at Break Lateral (G.P.20.2-89) | 480% | 480% |
| Thickness | 0.016″ | 0.42 mm |
| Colour | White |
INSTALLATION
Current Guide Specification and Application Instructions contain additional information specific to use of Reinforcing Fabric NW in applications of Flex-Top RM and Tuff-Flex products and must be followed.
WARRANTY
A limited twelve (12) month Material Replacement Warranty is available. For details contact Technical Service.
TECHNICAL SERVICE
For technical advice on suitability of Reinforcing Fabric NW for specific application, specification assistance and application advise contact Technical Services at 1-800-563-3618.
Short Specification
The reinforcing will be Reinforcing Fabric NW manufactured by Gemite® Products Inc., (905-672-2020). It shall be applied in accordance with manufacturer’s current guide specifications and application instructions. Contact Technical Service for specification assistance and application instructions.
2007-04
