Product Data Sheet
|03 05 00||
SPECTRUM 940 Shake-On Colorant is a silica aggregate-based colouring agent used in residential and commercial decorative concrete floor applications to add highlighted colours to the concrete. While SPECTRUM 940 Shake-On Colorant enhances concrete projects with permanent colour, it also serves to protect the concrete from normal wear, as well as weathering. SPECTRUM 940 Shake-On Colorant is ideal for use with stamped concrete hardscapes as it provides rich, colourfast surfaces.
SPECTRUM 940 Shake-On Colorant can be used on any horizontal, fresh concrete surface. SPECTRUM 940 Shake-On Colorant is available in 20 different colours, and can also be applied in combination with each other onsite to produce additional colour variations. Please contact a W. R. MEADOWS representative to view and discuss the colour selector chart.
- Provides permanent, vibrant colour for all concrete projects.
- Can be used in combination with SPECTRUM 920 Powder Stamp Release from W. R. MEADOWS to produce an “antiqued” look to any concrete project.
- SPECTRUM 940 Shake-On Colorant provides superior protection against normal wear, as well as weathering.
- SPECTRUM 940 Shake-On Colorant is available in 20 different colours.
16 Kg (35 Lb.) Pails
Approximate coverage is 2.9 kg/sq. m – 4.4 kg/sq. m ( 60 – 90 lb./100 sq. ft.). Lighter colours may require more material. Coverage is dependent on individual applications. Please contact a W. R. MEADOWS representative for further coverage information.
SPECTRUM 940 is designed for smaller decorative projects to create unique colour effects. For larger jobs requiring a single colour, W. R. MEADOWS recommends 785 GENFLOR NON- METALLIC FLOOR HARDENER.
One year in an unopened container, stored in a dry area away from moisture.
Surface Preparation … Prior to a full-scale application of SPECTRUM 940 Shake-On Colorant, an onsite test should be conducted utilizing the exact concrete mix design. Once the concrete has reached a point that no bleed water remains, open the surface with a wood float. The concrete should be placed, screeded, and floated prior to the installation of SPECTRUM 940 Shake-On Colorant.
Application Method … Broadcast SPECTRUM 940 Shake-On Colorant from the container, over the entire surface. Care should be taken to broadcast the material low across the surface to prevent air currents from separating the material. For optimum results, apply in two applications. Apply the first application by broadcasting two-thirds of the recommended dosage onto the surface, allowing it to wet out thoroughly before working it in with a bull float. The remaining one-third may then be applied following the same procedure. To achieve the most uniform colour, the floor should not be overworked. SPECTRUM 940 Shake-On Colorant must be worked in slowly, carefully, and uniformly for proper distribution and depth of colour. Allow the colorant to wet into the surface of the concrete prior to floating.
NOTE: DO NOT WATER CURE OR COVER CONCRETE TO CURE, AS THIS WILL CAUSE DISCOLOURATION.
Cleanup … SPECTRUM 940 Shake-On Colorant cleans up with water.
Protect adjacent surfaces when applying this product.
HEALTH AND SAFETY
Avoid direct contact with this product as well as inhalation of dust. If dust is generated, the use of respiratory equipment (dust mask) is recommended. If contact with the skin or eyes occurs, flush area with water. Consult product material safety data sheet (MSDS) for complete health and safety information.
2004 MASTERFORMAT NUMBER AND TITLE
03 05 00 – Common Work Results for Concrete
May help contribute to LEED credits:
This material last updated January 2011.