Product Data Sheet
|03 05 00||
SPECTRUM SURFACE ENHANCER
SPECTRUM SURFACE ENHANCER is a water-based product, specifically formulated to be used as an additive for SPECTRUM WATER-BASED STAIN from W. R. MEADOWS. Adding SPECTRUM SURFACE ENHANCER provides optimum adhesion to the concrete and will improve the ultimate durability of the stain. SPECTRUM SURFACE ENHANCER is non-flammable, non-combustible, non-hazardous, eco-friendly, and VOC-compliant. SPECTRUM SURFACE ENHANCER may also be used as a prime coat prior to the application of SPECTRUM WATER-BASED STAIN.
SPECTRUM SURFACE ENHANCER is specifically formulated to be used as an additive for SPECTRUM WATER-BASED STAIN.
3.79 litre (1 U.S. Gallon) containers
18.93 litre (5 U.S. Gallon) pails
May help contribute to LEED credits:
TECHNICAL DATA (Typical)
Solids, Wt. %:
Weight per 3.79 litres(1 U.S. gal.):
10 +/- 2
4.5 kg (8.9 lbs.)
Approximately 6.1 m²/L (250 ft.²/gal.), when used as a primer and approximately 12.3 m²/L (500 ft.²/gal.), when used as an additive with the SPECTRUM WATER-BASED STAINS, Natural Series (Solid) Colours. The recommended dilution ratio for base colours applied to concrete is 1 part colour concentrate to 2 parts Surface Enhancer to 2 parts de-ionized or reverse osmosis water.
*Coverage will vary due to dilution ratio (of the stain), profile, porosity, application technique, condition of the substrate, etc.
REGULATORY COMPLIANCE – VOC
SPECTRUM SURFACE ENHANCER meets all applicable Federal, State, District and Local, AIM VOC Regulations.
SHELF LIFE (TYPICAL)
One year in unopened, factory-sealed container. Store in a dry area, away from moisture, at 4 – 32° C (40 – 90° F).
SURFACE PREPARATION and APPLICATION
For detailed surface preparation and application instructions, please refer to the W. R. MEADOWS guide DETAILED APPLICATION INSTRUCTIONS FOR SPECTRUM WATER-BASED STAIN.
Primer: When used as primer for a SPECTRUM WATER-BASED STAIN, apply SPECTRUM SURFACE ENHANCER directly to the concrete surface, using a roller, at approximately 6.1 m²/L (250 ft.²/gal.). Allow SPECTRUM SURFACE ENHANCER to dry to touch prior to application of SPECTRUM WATER-BASED STAIN.
Additive: Refer to the W. R. MEADOWS guide DETAILED APPLICATION INSTRUCTIONS FOR SPECTRUM WATER-BASED STAIN.
HEALTH AND SAFETY
If contact with the skin or eyes occurs, flush area with water. Consult product Material Safety Data Sheet (MSDS) for complete health and safety information prior to using.