Product Data Sheet
Made from compressed wood fibers, WF XBOARD is a VOC-compliant, non-bituminous utility board with multiple uses in the concrete and swimming pool markets.
WF XBOARD can be used as a forming board in concrete flatwork, swimming pool decks, and cantilevered pool decks. The product can also be used as a pool tile ledger board for setting tile and copings.
- Will bend easily to form small radius
- Will work as a tile ledger in swimming pools and spas as small as 6’ (1.8 m) in diameter
- Available in two sizes
1/2″ x 4″ x 10′ (Nominal)
1/2″ x 6″ x 10′ (Nominal)
As a Forming Board … Nail product to stakes.
As a Tile Ledger … Nail to substrate at predetermined intervals.
A DIVISION OF W. R. MEADOWS®
P.O. BOX 397 HAMPSHIRE, IL 60140 PHONE: 800-542-POOL (7665) FAX: 847-214-2268
“DECK-O-SEAL®, A Division of W. R. MEADOWS, INC., warrants at the time and place we make shipment, our material will be of good quality and will conform with our published specifications in force on the date of acceptance of the order.” Read complete warranty. Copy furnished upon request.
The information contained herein is included for illustrative purposes only, and to the best of our knowledge, is accurate and reliable. DECK-O-SEAL cannot however under any circumstances make any guarantee of results or assume any obligation or liability in connection with the use of this information. As DECK-O-SEAL has no control over the use to which others may put its product, it is recommended that the products be tested to determine if suitable for specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Specifier and user shall determine the suitability of products for specific application and assume all responsibilities in connection therewith.