Canada
Français
Español
International
Start-to-Finish Support for Tilt-Up Concrete Construction
W. R. MEADOWS provides product solutions for the full tilt-up construction process, from casting slabs and bond breakers to vapor barriers, waterproofing, repairs, grouts, joint fillers, backer rods, and sealants.
Tilt-up construction depends on the right products at the right stage.
Tilt-up projects move quickly. The casting slab has to perform. Panels need to release cleanly. Joints, openings, foundations, vapor control, waterproofing, patching, and floor durability all have to be considered before the crane arrives.
W. R. MEADOWS supports tilt-up construction with a wide range of materials used before, during, and after panel erection. The goal is simple: help project teams reduce rework, protect concrete, support clean detailing, and keep the job moving.
Product categories, specification support, system considerations, and materials for commercial tilt-up wall assemblies.
Concrete protection, moisture control, grouting, joint movement, repair, and durable floor or wall performance.
Jobsite-ready products for curing, bond breaking, sealing, patching, waterproofing, and keeping schedules on track.
TILT-CRETE W/B Water-Based Cure & Bond Breaker
TILT-CRETE W/B is designed for tilt-up projects where clean panel release, consistent application, and low-VOC performance matter. It cures the casting slab and forms a bond-break layer to help tilt-up panels lift cleanly when properly applied.
The water-based formulation is suited for projects where solvent-based products are not preferred or where air-quality requirements are a concern. It is available in 5-gallon pails and 55-gallon drums.
Use TILT-CRETE W/B when the project calls for a water-based cure and bond breaker for tilt-up panel construction.
Help concrete cure properly before the lift.
Curing compounds help retain moisture in freshly placed concrete so slabs and panels can develop intended strength and surface quality. For tilt-up work, the right curing product can support better slab performance, panel appearance, and construction sequencing.
CRISTALLUM — Premium Clear, Water-Based Concrete Curing Compound
A clear, water-based curing compound for projects where concrete appearance is important.
View product
1100 — Resin-Based, Water Emulsion Concrete Curing Compound
A water-emulsion curing compound designed to form a moisture-retaining membrane on concrete surfaces.
View product
VOCOMP Series — Water-Based Acrylic Curing & Sealing Compounds
VOCOMP-20, VOCOMP-25, and VOCOMP-30 provide water-based curing and sealing options.
View productsImprove slab durability where jobsite traffic is unavoidable.
Tilt-up casting slabs often serve as work platforms during construction and finished floors after the building is enclosed. Hardeners and densifiers can help improve surface durability, reduce dusting, and support long-term floor performance.
LIQUI-HARD — Concrete Densifier & Chemical Hardener
A ready-to-use silicate hardener and densifier for concrete floors, slabs, and other concrete surfaces.
View product
LIQUI-HARD ULTRA — Molecular Concrete Densifier & Chemical Hardener
A lithium-silicate-based densifier used to harden and dustproof concrete surfaces.
View product
SIL-CRETE — Lithium-Silicate Curing Agent and Densifier
A low-solids lithium-silicate product that cures and densifies fresh troweled concrete.
View product
MED-CURE — Concrete Curing Agent, Hardener, and Dustproofer
A water-based curing, hardening, and dustproofing product for concrete surfaces.
View product
BELLATRIX — Premium Concrete Enhancer
A clear protective enhancer for sealed or polished concrete surfaces.
View productControl moisture before it becomes a floor or coating problem.
Moisture control starts below the slab. W. R. MEADOWS underslab vapor and gas barriers are used to help reduce moisture vapor transmission from the ground into the concrete slab and occupied structure.
PERMINATOR — 10 and 15 Mil Underslab Vapor Barrier
A polyolefin-based underslab vapor barrier used to help reduce moisture and water vapor transmission.
View product
PERMINATOR — 20 Mil Gas/Vapor Barrier
A heavier-duty underslab barrier option for added puncture resistance and moisture or gas vapor control.
View product
PERMINATOR EVOH — 20 Mil Underslab Gas/Vapor Barrier
A seven-layer co-extruded gas and vapor barrier designed to restrict naturally occurring gases and moisture vapor.
View product
PMPC — PREMOULDED MEMBRANE Vapor Seal with PLASMATIC CORE
A seven-ply vaporproofing and waterproofing membrane for underslab and related below-grade applications.
View productProtect foundations, walls, decks, and below-grade conditions.
Tilt-up buildings still need reliable waterproofing at foundations, walls, plaza decks, split slabs, planter areas, and other moisture-sensitive conditions.
ADI-CON CW PLUS — Crystalline Waterproofing Admixture
A dry crystalline admixture used to provide integral waterproofing protection within concrete.
View product
PRECON — Pre-Applied/Underslab Waterproofing Membrane
A composite pre-applied membrane used beneath slabs and in blindside applications.
View product
HYDRALASTIC 836 — Cold-Applied Waterproofing
A cold-applied, single-component waterproofing material that cures to form a flexible membrane.
View product
HRM 714 — Hot-Applied Rubberized Waterproofing Membrane
A hot-applied rubberized asphalt waterproofing membrane for demanding waterproofing applications.
View product
MEL-ROL — Self-Adhering Sheet Membrane
A self-adhering bituminous sheet membrane for below-grade walls, foundations, and related conditions.
View product
MEL-ROL LM — Liquid-Applied Seamless Membrane
A single-component, water-based liquid waterproofing membrane that can be sprayed or rolled.
View productRepair bugholes, surface defects, spalls, and damaged concrete.
Tilt-up panels and slabs can require touch-up after casting, lifting, bracing, and jobsite traffic.
MEADOW-PATCH SMOOTH GRADE — Ultra-Smooth Surface Finisher
A polymer-modified, sand-free finishing mortar for smoothing concrete surfaces.
View product
MEADOW-PATCH 5 — Very-Fast Repair & Waterstop
A fast-setting repair mortar and hydraulic waterstop for concrete repairs.
View product
MEADOW-PATCH 20 — Fast Setting Cementitious Repair Mortar
A single-component repair mortar for general concrete repair and tilt-up panel touch-ups.
View product
MEADOW-PATCH T1 — Thin-Patch Maintenance Mortar
A polymer-modified thin-patch mortar for localized repairs from featheredge to one inch.
View product
MEADOW-PATCH T2 — Resurfacer & Deep Patch
A two-component resurfacer and repair mortar for leveling and patching worn concrete surfaces.
View productSupport load transfer where precision matters.
Grouts are used beneath column bases, bearing plates, shim packs, precast panels, and other structural or equipment conditions.
CG-86 — Construction-Grade Grout
A premixed, non-metallic, non-shrink cementitious grout for structural grouting applications.
View product
PAC-IT — Expansive Dry-Pack Grout
A pre-mixed, non-ferrous, non-shrink dry-pack grout for tight packing beneath bases and panels.
View product
EG-96 HP — High Strength & Performance Epoxy Grout
A three-component, 100%-solids epoxy grout for applications requiring high strength and chemical resistance.
View product
588-10K — Precision Non-Shrink Grout
A hydraulic-cement-based, mineral-aggregate precision grout for load-bearing conditions.
View productBond, anchor, dowel, repair, and inject concrete.
W. R. MEADOWS epoxy adhesives support bonding, doweling, anchoring, crack repair, and structural patching applications.
REZI-WELD LV — Low Viscosity Injection Epoxy
An ultra-low-viscosity epoxy for gravity-feed or pressure-injection of hairline, non-moving cracks.
View product
REZI-WELD 1000 — Medium Viscosity Construction Epoxy
A two-component epoxy adhesive for concrete-to-concrete and concrete-to-steel bonding applications.
View product
REZI-WELD GEL PASTE — Thixotropic Construction Epoxy
A rapid-set, non-sag epoxy for vertical, overhead, and horizontal repairs where a paste consistency is needed.
View productAccommodate movement in concrete construction.
Expansion joint fillers help create and maintain separation between concrete sections so movement can be accommodated.
FIBRE EXPANSION JOINT — Expansion-Contraction Joint Filler
A resilient asphalt-saturated fiber joint filler used for concrete expansion and contraction joints.
View product
X-FOAM — Flexible Lightweight Expansion Joint Filler
A flexible, lightweight, non-staining, closed-cell expansion joint filler for interior and exterior applications.
View product
CERAMAR — Flexible Foam Expansion Joint
A lightweight, flexible foam expansion joint filler with a closed-cell structure.
View product
DECK-O-FOAM — Expansion Joint Filler
A flexible, lightweight, non-staining polyethylene closed-cell expansion joint filler.
View product
SNAP-CAP — Joint Cap Accessory
An accessory used with rigid expansion joint filler to help create a clean, uniform sealant reservoir.
View productPrepare joints for proper sealant placement.
Backer rods help control sealant depth, support proper joint geometry, and prevent three-sided adhesion.
KOOL-ROD — Backer Rod for Cold-Applied Sealants
A closed-cell polyethylene foam joint backing material used with a variety of cold-applied sealants.
View product
KOOL-ROD SOFT — Soft Expandable Backer Rod
A softer, expandable backer rod option for cold-applied sealants and a wider range of joint sizes.
View productSeal horizontal, vertical, and interior concrete joints.
Joint sealants help protect concrete joints from water, debris, traffic, and weather exposure.
POURTHANE SL — Self-Leveling Joint Sealant
A one-component, self-leveling polyurethane joint sealant for horizontal joints in concrete surfaces.
View product
POURTHANE NS — Non-Sag Polyurethane Joint Sealant
A one-component, non-sag polyurethane sealant for vertical, sloped, and formed joints.
View product
REZI-WELD FLEX — Semi-Rigid Epoxy Joint Filler
A pourable, self-leveling epoxy joint filler used to protect interior concrete floor joints from hard-wheel traffic.
View product
REZI-WELD 360 — Semi-Rigid Polyurea Control Joint Filler
A fast-curing, self-leveling polyurea joint filler for protecting interior concrete control, contraction, and construction joints from hard-wheeled traffic.
View productNeed help selecting products for a tilt-up project?
W. R. MEADOWS can help connect project teams with product information, data sheets, guide specifications, installation information, and technical support for tilt-up construction applications.
Always review the current product data sheet, application instructions, limitations, and project specifications before product selection or installation.