What makes up the total moisture control package?
W. R. MEADOWS manufactures a complete line of concrete waterproofing and moisture control products. When these products are used in combination as a system, they ensure that you have complete control of moisture migration in your facility.
|Concrete Waterproofing Applications:
|Whatever your needs…
We have the solution.
Concrete Waterproofing Products
HYDRALASTIC 836 is a cold-applied, solvent-free, single-component waterproofing compound. It does not shrink, has a low volatile organic compound (VOC) content, and has a very low odor. It will not crack in extreme cold or slump due to softening at high temperatures.
MEL-DEK is a roll-type waterproofing membrane composed of a nominally 53 mil thick layer of polymeric waterproofing membrane on a shrink-resistant, heavy-duty, 12 mil thick polypropylene woven carrier fabric.
MEL-ROL® LM is a single-component, polymer-modified, cold-applied, water-based, liquid waterproofing membrane ideal for below-grade horizontal and vertical seamless waterproofing applications. We have taken the same high quality rubber polymers found in MEADOWS’ successful MEL-ROL “peel and stick” membrane, and converted them into a heavy bodied, high solids, quick drying liquid membrane.
MEL-ROL LM (ALL SEASON) can be used on new and remedial waterproofing applications on concrete or masonry block substrates. Application can be performed in colder weather when water-based products cannot be used.
MEL-ROL waterproofing system is a flexible, versatile, dependable, roll-type waterproofing membrane. It is composed of a nominally 56 mil thick layer of polymeric waterproofing membrane on a heavy-duty, 4 mil thick, cross-laminated polyethylene carrier film.
PRECON is used as a blindside mebrane in vertical applications where access to the positive side is limited. The membrane can also be used for horizontal applications for underslab waterproofing and vaporproofing.
PROTECTION COURSE is a multi-ply, semi-rigid core composed of a mineral-fortified asphalt core formed between two outside layers of asphalt-impregnated reinforced mats.
PERMINATOR® underslab vapor barrier can also be used as a protection course for waterproofing membranes. The desired sheet lengths are cut to size and retained at the top of the waterproofing membrane by PERMINATOR TAPE or TERMINATION BAR. PERMINATOR 10 mil is also ideal for use over horizontal applications of MEL-ROL LM.
TERMINATION BAR from W. R. MEADOWS is provided in 10′ (3 m) lengths for your attachment needs.
MEL-DEKTM waterproofing system provides an excellent waterproofing membrane for bridges, parking decks or other vehicular traffic structures to be overlaid with an asphaltic concrete wearing course. Ideal for repair, maintenance or new construction applications.
More Concrete Waterproofing Products
Prefabricated Soil Drain System
One-Component Waterproofing Membrane
Hot-Applied Rubberized Asphalt Membrane
Cold-Applied, Single-Component Polymeric Sealing Compound
Canadian Concrete Waterproofing Products
CEM-KOTE CW Plus (Canada)
Capillary / Crystalline Waterproofing
Request More Information
Fill out the form below to request more information on W. R. MEADOWS’ Concrete Waterproofing solutions. Thanks for your interest!