• Air Barriers 9 Articles
• Waterproofing 9 Articles
• Primer/Adhesives 3 Articles
• Dampproofing 5 Articles

• How thick is PMPC?
• Why has puncture resistance information changed on the Perminator data sheet?

View all

• Will Pourthane bond to an epoxy countertop?
• Are Cera-Rod and Kool-Rod UV-resistant?
• Will Sof-Seal interact or deter epoxy paint?
• What is the chlorine exposure limit of Deck-O-Seal Gun Grade?
• What joint sealant is recommend for occasional exposure to bleach (sodium hypochlorite)?

View all

• How fast can Cem-Kote Flex ST be applied to new mortar/block? How long does it need to cure before spray foam can be applied over it?
• Can Adi-Con CW Plus be added to Meadow-Crete FNP?
• How many days should concrete be cured prior to applying Cem-Kote Flex ST?

View all

• When using ACRY-LOK, is there any reaction to insulated concrete forms, expanded polystyrene?

View all

• Can Rezi-Weld 3/2 and/or Rezi-Weld 1000 work for an application of metal to metal?
• Is a there a test to determine if a grout is epoxy or not epoxy?
• Can Rezi-Weld LV be used in gravity-fed applications?
• Can you add a pigment to our repair mortars and/or grouts?
• Can you use a solvent based sealer with a polymer modified repair mortar?

View all

• General 17 Articles
• 1100 Series 4 Articles
• 1220-WHITE 1 Article
• 1600-WHITE 1 Article
• BELLATRIX 2 Articles
• CS-309-25 3 Articles
• DECK-O-GRIP 1 Article
• DECK-O-SHIELD 1 Article
• DUOGARD 2 Articles
• HIAC 1 Article
• HYDRASET Series 3 Articles
• INTRAGUARD 4 Articles
• LIQUI-HARD 5 Articles
• LIQUI-HARD ULTRA 4 Articles
• PENCURE OTC 1 Article
• PENTREAT Series 3 Articles
• SURE-STEP 1 Article
• TOP-STOP 2 Articles
• ULTRITE 2 Articles
• VOCOMP Series 4 Articles

View all

• Can Floor-Top STG get built up to 2” in multiple applications and then polished?
• For extension of Meadow-Crete FNP with aggregate, what is the recommended size and how much can a bag be extended?
• Would Rezi-Weld Gel Paste be able to glue plywood to metal?
• Can polymeric sand be added to Rezi-Weld 1000?
• What product is recommended for filling/repairing multiple shallow “divots” in the ceiling of an old concrete garage?

View all

• Can ASPHALT EXPANSION JOINT be cut?
• Is Sponge Rubber Expansion Joint resistant to oil?
• Is Ceramar is resistant to liquid oxygen?
• How high of temperatures will Fibre Expansion Joint be able to withstand?
• Is Ceramar jet-fuel resistant?

View all

• What is the W. R. Meadows equivalent of BASF MasterFlow 928?
• Does W. R. Meadows manufacture a grout that is suitable to exposure to hydrogen sulfide?
• How many lbs. of Adi-Con CW Plus need to be added when using CG-86?
• What is the service temperature of V-1?
• Is a there a test to determine if a grout is epoxy or not epoxy?

View all