Product Data Sheet
07 10 00 |
|
CURE-IT
Liquid Curative
DESCRIPTION
CURE-IT is an aqueous solution curative for curing AIR-SHIELD™ LM and MEADOW-PRUF CO-SPRAY from W. R. MEADOWS. CURE-IT is sprayed in tandem with the applicable product through W. R. MEADOWS recommended spray equipment.
USES
CURE-IT is used as a curative co-spray with AIR- SHIELD LM spray-applied air/vapor barrier membrane when single high-build application is desired and/or quicker set time is needed in cold weather. It is also used in the MEADOW-PRUF CO-SPRAY waterproofing membrane complete system.
FEATURES/BENEFITS
- Will not cause corrosion to adjacent or embedded metal components
- Suitable for use in systems where introduction of chlorides is forbidden
- Mess-free, easy dispense with pour-spout on pails
- Provides rapid set, even in cold weather
- Provides ability to spray apply in a single-coat application
PACKAGING
5 Gallon (18.93 L) Pails
SHELF LIFE
When stored indoors in original, unopened containers at temperatures between 40° – 85° F (4.4° – 29.4° C), optimum performance and best use is obtained within two years of date of manufacture.
TECHNICAL DATA
VOC Content: 0 g/L
APPLICATION
CURE-IT is provided ready to use, dilution-free. CURE-IT is not a standalone product but is used with AIR-SHIELD LM and MEADOW-PRUF CO-SPRAY as an accelerator curative. Follow application instructions for specific product and consult INSTALLATION INSTRUCTIONS: SPRAYER EQUIPMENT GUIDELINES FOR W. R. MEADOWS FLUID-APPLIED MEMBRANES available at www.wrmeadows.com.
ESTIMATING
One five-gal. pail of CURE-IT will typically be needed for eight five-gal. pails of AIR-SHIELD LM and MEADOW-PRUF CO-SPRAY. This ratio is highly dependent on nozzle size and spray pressures of both CURE-IT and AIR-SHIELD LM/ MEADOW-PRUF CO-SPRAY and will vary based on these conditions.
LIMITATIONS/PRECAUTIONS
Designed for professional contractors; industrial use only. Refer to safety data sheet for complete health and safety information.
2024-03