Canada
Français
Español
InternationalCure, Seal, and Enhance Concrete
VOCOMP water-based acrylic curing and sealing compounds help retain moisture in fresh concrete, protect the finished surface, and leave a clear sheen that enhances the natural look of the slab.
Water-Based Cure-and-Seal Options for Concrete
VOCOMP products are designed for people who need concrete curing and sealing to be practical, efficient, and jobsite-friendly. Instead of treating curing and sealing as two separate conversations, VOCOMP helps contractors protect new concrete while improving the finished appearance of the surface.
These water-based acrylic compounds apply milky white, provide visual placement during application, and dry clear to a transparent sheen. Depending on the product selected, VOCOMP can be used to cure, seal, dustproof, and enhance concrete on interior, exterior, horizontal, and vertical surfaces.
Quick Product Guide
The VOCOMP line is built around three simple product choices.
Common Applications
VOCOMP products are commonly used on concrete surfaces where curing, sealing, dustproofing, appearance, and surface protection are part of the project goal.
Choose the Product That Fits the Job
All three products are water-based acrylic curing and sealing compounds. The right choice depends on whether the concrete is new or existing, the desired sheen, and the level of film build needed.
VOCOMP-20
VOCOMP-25
VOCOMP-30
Planning a Concrete Curing or Sealing Project?
Review product data, application rates, surface preparation guidance, and coverage estimates before starting work.
VOCOMP Product Options
Compare the three VOCOMP products below to find the right curing and sealing compound for your concrete surface.
VOCOMP®-20
Water-Based, Acrylic, Concrete Curing and Sealing Compound
VOCOMP-20 is a dependable water-based acrylic cure-and-seal for concrete surfaces where moisture retention, a clear sheen finish, and practical application are important.
Good Fit For
Sidewalks, patios, driveways, parking areas, basement floors, garage floors, and interior or exterior concrete surfaces.
Key Benefits
- Helps retain moisture during curing.
- Dries clear to a transparent sheen finish.
- Non-yellowing, water-based acrylic formula.
- Suitable for interior, exterior, horizontal, and vertical concrete surfaces.
VOCOMP®-25
Water-Based, Acrylic Concrete Curing and Sealing Compound
VOCOMP-25 is a 25% solids water-based acrylic compound for concrete projects where the finished appearance is a larger part of the decision.
Good Fit For
Driveways, sidewalks, patios, pool areas, commercial floors, and other new or existing concrete surfaces where a clear, easy-to-clean sheen finish is desired.
Key Benefits
- 25% solids formulation.
- Can be used on new or existing concrete.
- Helps minimize dusting, hair-checking, premature cracking, and spalling.
- Offers improved resistance to chemicals, petroleum, and abrasives.
VOCOMP®-30
Water-Based, Acrylic, Concrete Curing and Sealing Compound for Fresh Concrete
VOCOMP-30 is a 30% solids water-based acrylic curing and sealing compound designed for fresh concrete only.
Good Fit For
Freshly placed interior or exterior concrete, including driveways, sidewalks, patios, pool deck areas, and commercial or industrial floors.
Key Benefits
- 30% solids formulation for a thicker film.
- Designed for fresh concrete only.
- Dries clear to a tough, easy-to-clean sheen finish.
- Offers improved resistance to many chemicals, petroleum, abrasives, and pollutants.
Application note: Coverage and finish appearance can vary based on surface texture, concrete condition, temperature, humidity, and application method. Always review the current product data sheet and apply to a test area before full-scale application.
Need Help Choosing the Right VOCOMP Product?
Contact your local W. R. MEADOWS representative for help matching the product to your concrete surface, finish expectations, project conditions, and application requirements. For immediate assistance, call (800) 342-5976.