DETAIL TAPE H is a polymeric waterproofing membrane on a shrink-resistant, heavy-duty, polypropylene woven carrier sheet. It is nominally 65 mils thick and is 12” wide.
Product Data Sheet
|07 13 00||
DETAIL TAPE H
Polymeric Waterproofing Membrane
DETAIL TAPE H is a polymeric waterproofing membrane on a shrink-resistant, heavy-duty, polypropylene woven carrier sheet. It is nominally 65 mils thick and is nominally 12″ wide.
DETAIL TAPE H can be used as a detailing option with PRECON® from W. R. MEADOWS in horizontal applications.
- Easy to apply with removable release paper
- Provides a secure, durable bond
- Compatible with PRECON
12″ (nominal) x 50′ (304.8 mm x 15.24 m) Rolls, 4/Carton.
Subgrade Preparation … Ensure subgrade is smooth and compacted to help avoid the formation of creases (fish mouths) between the PRECON and DETAIL TAPE H during detailing tie-in procedure.
Application Method … Place a strip of 12″ (304.8 mm) DETAIL TAPE H with the adhesive side of the tape facing upwards. Remove the release paper on the one side of the tape, exposing 6″ (152.4 mm) of the rubberized asphalt and apply the PLASMATIC® CORE side of the PRECON into this and roll press into place. Following this, remove the remaining release paper on the tape and apply the subsequent roll of PRECON into this area, making sure that both rolls are butted together. Roll press this into place. Following that, apply a 12″ (304.8 mm) band of the POINTING MASTIC onto this overlap at a thickness of approximately 60 mils, and embed the DETAIL FABRIC into this. Please reference the END LAP TAPING METHOD TECHNICAL BULLETIN at www.wrmeadows.com for detailed visual installation instructions.
During the entire application process, ensure that DETAIL TAPE H remains clean, free of any containments, dirt, dust, sand, etc. that will interfere with creating a watertight bond between DETAIL TAPE H and PRECON.
DETAIL TAPE H is not compatible with most polyurethanes membranes or sealants.