Do we have any pull test documentation for the Vocomp line, or anything that can provide information on compatibility with adhesives?

When tested in accordance to ASTM C1315, Section 8.8 for Adhesion, VOCOMP-20 is compatible with ceramic adhesives that meet the requirement of ANSI A136.1-1992.  The measured pull-off strength is greater than 70 psi (0.5 MPa). For any alternate specifications or requirements, secure the approval of the manufacturer of any paint, coating, carpet, adhesive, resilient flooring, floor topping, etc. (any type/composition of subsequent floor treatment) that will be applied over VOCOMP-20. Obtain this approval before applying their product over concrete previously cured with VOCOMP-20. The specifier and user shall determine the suitability and assume all responsibilities in connection therewith.