What is the best way to remove AIR-SHIELD LMP from concrete?
Paint stripper will work well. Colder temperatures will make it more difficult to remove. Mechanically remove as much as possible....
What are the coverages on different substrates for AIR-SHIELD LMP?
It varies on every substrate. On the data sheet, we list the coverage for gypsum sheathing which would be pretty...
What is the exposure time of Air-Shield?
Exposure time for Air-Shield is 45 days max.
For Air-Shield TMP, does “Service Temperature: Not to exceed 175° F (80° C)” refer to the air space in the cavity walls? In this case, behind metal panels?
The 175° F is the maximum service temperature of Air-Shield TMP and that would include the air temperature inside the...
At temperatures of 40 degrees plus, what cure time should be expected before Air-Shield TMP is subject to rain?
Air-Shield TMP is being spray-applied at temps in the 40s (F). At temperature of 40 degrees plus, what kind of...
Can Air-Shield LMP be painted over with an acrylic latex paint?
The contractor should check with the paint manufacturer. It is possible but the applicator would need to confirm with the...
What is the proper repair on Air-Shield LM if the mason contractor anchors his brick tie in the wrong spot?
What is the proper repair on Air-Shield LM if the mason contractor anchors his brick tie in the wrong spot...
What is the softening temperature of Air-Shield LM? In the summer it may be left exposed in the heat on a wall. At what point will it begin to “slide”?
The softening point is 180°-190°F. The material on a vertical surface would not flow below temperatures of 150°F.
What sprayer do you recommend for spraying Air-Shield LM?
Please see this technical article for more information. Sprayer Equipment Guidelines for W. R. MEADOWS Fluid-Applied Membranes (Study)