While choosing the correct waterproofing/vaporproofing membrane is important to achieve a successful barrier in any underslab or blindside application, proper installation is imperative to avoid costly and time-consuming repairs if failures occur. W. R. MEADOWS recommends using PRECON pre-applied underslab/blindside waterproofing membrane for vertical and horizontal applications when access to the positive side of the concrete is restricted. Prior to applying PRECON, proper surface preparation is necessary to ensure the surface is structurally sound and all objects are removed that may cause damage to the membrane. Use of MEL-DRAIN is recommended to be used with PRECON to assure proper site…
Blog
Winter is Coming, but PRECON can Handle it
Labor Day marks the end of summer and colder weather is just around the corner, but don’t let the changing of the seasons inhibit construction plans. PRECON underslab membrane offers a tough blindside waterproofing solution and is able to prevent moisture infiltration and reduce methane and radon gas invasion even in low temperatures. PRECON’s seven-layer matrix designed to mechanically bond to concrete once it cures can be installed in temperatures down to 40°F (5°C). PRECON LOW TEMP is recommended for environments where the temperature is between 60° F (16° C) and 25° F (-4° C). To assist with effective installation,…
Reduce moisture and water vapor effectively with proper PERMINATOR installation
PERMINATOR underslab vapor barrier with polyolefin-based resin/chemical technology offers one of the lowest perm ratings available combined with the additional benefit of considerable puncture resistance. PERMINATOR helps protect structures from fungus, mildew and mold growth by reducing moisture and water vapor infiltration through the concrete slab. PERMINATOR also restricts radon gas from entering the building. As important as it is to choose the correct vapor barrier, proper installation is key to ensure effective protection. To assist in application, installation instructions are available. These guidelines cover typical PERMINATOR applications including penetration detail procedures and how to patch holes. A PDF version…
Ensure a secure drainage system with helpful MEL-DRAIN installation guidelines
MEL-DRAIN rolled matrix drainage system can be used in conjunction with W. R. MEADOWS’ moisture protection systems to allow the passage of moisture while filtering out fine soils through the drainage channel to assist in enhanced waterproofing performance. MEL-DRAIN relieves hydrostatic pressure buildup and provides protection for waterproofing materials. While MEL-DRAIN is easy to install, proper application is necessary to ensure a long performance life. To assist with installation, guidelines were created to aid in various application scenarios. These guidelines cover how to use MEL-DRAIN accessory products as well as attachment methods, how to connect rolls, and proper sealing methods…
Keep LIQUI-HARD treated surfaces looking their best with our easy-to-follow maintenance guidelines
LIQUI-HARD concrete densifier and chemical hardener penetrates deep into the concrete being treated, leaving a residue-free surface. The hardened and dustproofed concrete requires similar maintenance compared to untreated substrates after LIQUI-HARD is applied. Simple sweeping or mopping daily or as needed on hand-troweled concrete is recommended. Once a week or when needed, hose the surface down with water. A soft sponge squeegee or a or a ride-on vacuum squeegee with a foam pad can be used to remove excess water. In areas that have gathered dirt, a mild, neutral pH detergent soap can be used with a bristle brush or…
LIQUI-HARD Concrete Densifier & Chemical Hardener
LIQUI-HARD is a proprietary, water-based, ready-to-use, clear silicate liquid concrete densifier and chemical hardener. LIQUI-HARD is formulated with chemically reactive raw materials to harden and dustproof concrete. The finished surface offers considerable enhancement in abrasion and chemical resistance and will significantly improve durability when compared to untreated concrete surfaces. LIQUI-HARD penetrates deeply into the concrete surface, causing a chemical reaction to take place, producing a byproduct that fills in the pores of the concrete. LIQUI-HARD solidifies the concrete, eliminating dusting and pitting. LIQUI-HARD will not discolor or show pedestrian or vehicular traffic wear marks and is ideal for industrial facilities…
Truck Driver Shortage
We at W. R. MEADOWS pride ourselves on manufacturing and delivering materials efficiently and to the best of our ability. However, as many of you are aware, the state of the nation’s trucking industry is making it challenging for all companies to find and schedule shipments. The nation’s driver shortage is negatively impacting all trucking companies. In fact, it is rated as the top concern for trucking companies. (Report issued by the American Transportation Research Institute.) For more perspective on this problem, please see this article. Rest assured that the W. R. MEADOWS transportation department is working diligently with our…
Ensure a seamless building envelope with the proper application of AIR-SHIELD
AIR-SHIELD self-adhering moisture barrier offers a strong and durable option to prevent unwanted air, vapor, and liquid infiltration through the building envelope. This roll-type membrane allows for guaranteed consistent coverage and will adhere to most primed surfaces at minimum temperature of 40° F (4° C). AIR-SHIELD’s self-healing characteristics offer excellent puncture resistance from self-tapping screws or nails during installation. To help with the proper techniques to treat rough openings with AIR-SHIELD, we offer a detailed guide that covers several suitable detailing options. It’s important to install a transition membrane over every rough opening accurately to secure a tight, dependable building…
Anchor and Bond with Confidence with REZI-WELD GEL PASTE STATE Construction Epoxy
REZI-WELD GEL PASTE STATE chemical anchoring and bonding adhesive and injection gel is a high viscosity, high modulus, two-component, rapid-setting construction epoxy. REZI-WELD GEL PASTE STATE is moisture insensitive and vigorously bonds to concrete and other various substrates to provide high mechanical properties. Trowel, brush, inject, or pump REZI-WELD GEL PASTE STATE into place. REZI-WELD GEL PASTE STATE is easy to mix and apply and is ideal for filling cracks, anchoring, doweling, making small patches, general repairs, and surface sealing prior to pressure injecting. When used as an adhesive, REZI-WELD GEL PASTE STATE fills voids between the surfaces to be…
Learn more about PERMINATOR EVOH, our Newest Underslab Gas Vapor Barrier
PERMINATOR EVOH, W. R. MEADOWS’ most recent addition to its extensive vapor barrier line, offers a strong gas barrier membrane option that is durable and efficient in preventing contaminates in the soil from penetrating the structure. PERMINATOR EVOH’s seven-layer co-extruded barrier manufactured from state-of-the-art polyethylene and EVOH resin is specifically designed for brownfield sites to restrict gases, such as gasoline, solvents, oils, radon, methane, and hydrocarbons from migrating through the ground and into the concrete slab. EVOH also provides superior resistance to moisture transmissions. PERMINATOR EVOH efficiently resists gas and moisture migration as a part of passive or active building…
AIR-SHIELD TMP for Thin yet Durable Air Barrier Protection
As part of W. R. MEADOWS’ fluid-applied air barrier line, AIR-SHIELD TMP offers a thin air and liquid resistive barrier formulated to allow vapor to pass through it. AIR-SHIELD TMP is a great choice when the application does not require a thicker barrier. This single-component, water-based air barrier cures to form a tough, seamless, elastomeric membrane that has been fully tested to comply with all of the performance requirements for an air and water resistive barrier. AIR-SHIELD TMP may be applied to most common rough or smooth surfaces and integrated into various new construction and retrofit wall systems. AIR-SHIELD TMP…
New from W. R. MEADOWS – DECRA-SEAL NATURAL
New from W. R. MEADOWS comes DECRA-SEAL NATURAL, a low-VOC, water-based sealer that enhances the natural appearance of interior, exterior, horizontal and vertical decorative concrete, pavers, unglazed tiles, and a variety of porous natural and artificial stones. If your project is in need of a tough water repellent sealer that won’t add an artificial-looking shine, DECRA-SEAL NATURAL will do just that. Enhance the appearance of the substrate without compromising its natural features. DECRA-SEAL NATURAL is a non-film forming, penetrating water repellent that chemically bonds to the substrate to help increase the service life. DECRA-SEAL NATURAL offers a long-lasting, non-yellowing finish. …
PENCURE OTC Effectively Cures with its Dual-Action Formulation
New from W. R. MEADOWS, PENCURE OTC simultaneously forms a membrane to cure the concrete while also penetrating into the surface to aid in the reduction of water and salts into the concrete. This non-yellowing, clear, silane and acrylic curing compound is ideal for fresh, exterior, broomed concrete, such as driveways, patios, and parking lots. PENCURE OTC offers several beneficial features including a simple, single-step application method. Reduce crazing and shrinking cracks common to improperly cured or uncured concrete with PENCURE OTC. PENCURE OTC complies with ASTM C309, Type 1, Class A and B. Its permeable film allows moisture in…
New from W. R. MEADOWS – ULTRITE COATING REMOVER
ULTRITE COATING REMOVER is a soy gel that effectively lifts a wide range of one-part topical coatings, such as sealers, acrylics, urethanes, latexes, lacquers, etc. from a variety of surfaces including concrete, masonry, wood, and metal. This easy to use coating remover can remove multiple layers in one application. ULTRITE COATING REMOVER works hard so you don’t have to. Avoid vigorous scrubbing with ULTRITE COATING REMOVER’s simple “apply, wait, remove, clean, done” instructions. ULTRITE COATING REMOVER does not contain methylene chloride, is low odor, and is safe for interior use. It is ideal for use in warehouses, industrial plants, schools,…
Ensure a Dependable Building Envelope with AIR-SHIELD LSR
When versatility, simplicity, durability, and cost-efficiency are all top priorities for choosing the proper barrier for your building envelope project, look no further than AIR-SHIELD LSR from W. R. MEADOWS. AIR-SHIELD LSR offers a fluid-applied liquid synthetic rubber barrier option capable of air, water, and vapor protection. AIR-SHIELD LSR possesses many fluid-applied material benefits, such as ease of application, seamless protection, and superior performance. AIR-SHIELD LSR is appropriate to use on most common surfaces, various wall systems, and suitable for both new construction and restoration. Non-toxic and with low VOC content, AIR-SHIELD LSR is environmentally compatible, produces no harmful odors,…
AIR-SHIELD LMP Air and Liquid Moisture Barrier Offers Tough Resistance Combined with Vapor Permeance
AIR-SHIELD LMP water-based air and liquid moisture barrier cures to form a tough, seamless, elastomeric membrane specifically formulated to allow vapor to pass through it. Its high permeability allows the transmission of water vapor, while exhibiting excellent resistance to air leakage. AIR-SHIELD LMP’s versatility offers superior adhesion to most common new construction and retrofit applications even when applied over damp surfaces. AIR-SHIELD LMP’s water-based formula features low VOC content allowing for simple, safe application and easy cleanup. Use nails and fasteners without compromising performance with AIR-SHIELD LMP’s self-sealing functionality. AIR-SHIELD LMP comes in standard gray which is UV resistant up…
AIR-SHIELD LM Air, Vapor and Liquid Moisture Barrier for Tough, Seamless Resistance
When excellent resistance to air and moisture transmission is a must, AIR-SHIELD LM single-component, liquid-applied, water-based, polymer-modified moisture barrier is there to inhibit unwanted air, vapor, and liquid intrusion. AIR-SHIELD LM is versatile and suitable for new construction and restoration applications in various wall system integrations. AIR-SHIELD LM is non-toxic and user friendly, allowing for safe application and easy cleanup. Sprayable AIR-SHIELD LM offers excellent adhesion, capable of being firmly bonded to large spaces even when applied over damp surfaces or green concrete, providing an economically efficient solution. We offer specific application instructions to assist with ease of use, including…
Choose REINFORCING FABRIC HCR when Reinforcing Our Building Envelope Products
When applying the wide array of building envelope materials from W. R. MEADOWS, don’t forget about our versatile REINFORCING FABRIC HCR product. REINFORCING FABRIC HCR is a spun-bonded polyester hot/cold reinforcing fabric. The product is fully compatible with our waterproofing and air barrier products. REINFORCING FABRIC HCR is designed to be used as a standard reinforcement material for the W. R. MEADOWS line of building envelope products, including HRM 714 and HYDRALASTIC 836. It is used to reinforce the various membranes over cracks, construction joints, and changes-in-plane. The product can also be used with the AIR-SHIELD line of air barriers…
Waterproof Expansion Joints with DECK-O-SEAL ONE STEP
DECK-O-SEAL ONE STEP is an easy and efficient way to seal vertical expansion joints with it’s single-component, non-sag, elastomeric, polysulfide-based compound qualities. Ideal for caulking joints in structures that are subject to movement caused by temperature change, DECK-O-SEAL ONE STEP is ideally suited for applications where an expansion joint is recommended. DECK-O-SEAL ONE STEP bonds well to concrete, masonry, glass, metal, and wood. In addition to offering glazing operations and sealing joints, DECK-O-SEAL ONE STEP also resists the effects of oil and gasoline when spills are wiped up immediately. DECK-O-SEAL ONE STEP is often used in high sloping and vertical…
Need effective cementitious waterproofing protection? Choose CEM-KOTE FLEX ST.
Looking for an effective cementitious waterproofing product? CEM-KOTE FLEX ST is the answer! W. R. MEADOWS offers this product, along with a series of cementitious waterproofing products, through our exclusive partnership with Gemite. The key product in this line is CEM-KOTE FLEX ST. CEM-KOTE FLEX ST is a highly flexible, fiber-reinforced, breathable, cementitious slurry, consisting of dry Component A and liquid Component B. CEM-KOTE FLEX ST is designed for positive and negative waterproofing of concrete structures in new construction and restoration. It is suitable for water and wastewater tanks, secondary containment structures, tunnels, concrete slabs, balconies, and patios with light…
Make Waterproofing Easy with MEL-ROL Self-Adhesive Membrane
When a dependable waterproofing solution is needed, quality doesn’t need to be compromised to accommodate a simple installation method. Flexible, versatile roll-type MEL-ROL offers a tough 56 mil thick polymeric waterproofing membrane that unrolls quick to assure consistent coverage. An easy to follow 2 ½” overlap guideline is printed on the material to assist in maintaining a straight application without the hassle of measuring or repositioning. Eliminate the need for additional adhesive with polymeric membrane strips that are a built-in part of the MEL-ROL system. These easy to expose strips are provided on both sides of the MEL-ROL surface for…
Reduce moisture and water vapor infiltration with PERMINATOR
If your project is in need of an economical yet highly effective underslab vapor barrier, look no further than PERMINATOR. PERMINATOR offers polyolefin-based resin/chemical technology which significantly increases puncture resistance while maintaining one of the lowest perm ratings available. The use of PERMINATOR will help reduce fungus, mildew and mold growth as well as decrease radon gas infiltration into any building structure. W. R. MEADOWS offers PERMINATOR in two thicknesses, 10 mil and 15 mil options. Both versions are available in 200’ long rolls which unroll efficiently for quick installation and require fewer seams during application. For superior protection, PERMINATOR…
Smooth uneven floors with FLOOR-TOP STG Concrete Floor Topper
Quickly level uneven, rough interior concrete floors with FLOOR-TOP STG. This concrete floor topper is a standard traffic-grade, self-leveling underlayment that can be pumped or poured. Single-component FLOOR-TOP STG is shrinkage resistant and ideal for smoothing and leveling concrete prior to the application of a flooring system or coating. Floor coverings may be installed in as little as 18 hours after FLOOR-TOP STG application. Color enhance FLOOR-TOP STG for a unique, aesthetically pleasing look. Perfect for residential, commercial, retail, and office applications, FLOOR-TOP STG cures to a hard surface suitable for foot and light traffic. Our FLOOR-TOP STG flyer is…
Check Out Our New Precast Brochure!
W. R. MEADOWS’ new precast brochure is now available for request! This detailed, informational piece highlights the products in our vast line that have been designed for the precast concrete market. For the precast market, W. R. MEADOWS offers a diverse product line, including form release agents, concrete curing compounds, and waterproofing membranes. This brochure covers these products in detail, and also includes product descriptions, photos, and a list of ideal applications. Popular products included in the brochure are DUOGARD form release, 1600-WHITE concrete cure, and CEM-KOTE FLEX ST cementitious waterproofing. But these are just a taste – make sure…
Selecting the Correct Waterproofing Membrane
When choosing a below-grade waterproofing membrane, make sure it’s tough enough to protect the foundation of the building from the destructive effects of water and vapor infiltration. The Manual of Below-Grade Waterproofing Systems, a comprehensive book written by Justin Henshell and published by John Wiley & Sons, Inc., lists criteria for selecting the correct waterproofing including the nature of the soil, hydrostatic pressure, the location of the water table, substrate stability, building occupancy, and constructions. Wendy Talarico, LEED AP and architectural service specialist at W. R. MEADOWS, discusses a blindside waterproofing application at the Arizona Center for Law and Society.…
Choose SPECTRUM RE-KOTE TF to Renovate and Enhance Concrete Surfaces
SPECTRUM RE-KOTE TF from W. R. MEADOWS is designed to create a durable and aesthetically pleasing concrete surface. It is a high strength, rapid turn-around, durable overlay/repair mortar that may be stamped or stencil and colored enhanced to provide the owner not only with a durable repair, but an architecturally pleasing overlay with minimal disruption/downtime. If your need is to quickly repair a concrete floor, or fix and create a decorative surface, SPECTRUM RE-KOTE TF is a perfect choice. SPECTRUM REKOTE TF’s excellent bond strength, breathable properties, and freeze-thaw resistance enable its use for interior and/or exterior surfaces; below-, above-…
Waterproof your deck with MEL-DEK
MEL-DEK from W. R. MEADOWS offers a waterproofing system designed specifically for tough waterproofing jobs where heavy traffic will take place. MEL-DEK’s 65 mils thick roll-type polymeric waterproofing membrane, combined with a durable polypropylene woven carrier fabric designed not to shrink, provides excellent waterproofing for bridges and parking decks where asphalt wearing course will be overlaid. MEL-DEK is versatile and can be used for repair, maintenance, or new construction applications. The reliable materials MEL-DEK encompasses requires no protection and can endure hot asphalt overlays. MEL-DEK is easy to install with an ¾” overlapping rubberized asphalt seam ensuring uniform coverage. Asphalt…
AIR-SHIELD LIQUID FLASHING for Rough Opening Detailing
When rough openings and detail joints between exterior gypsum boards are in need of detailing, AIR-SHIELD LIQUID FLASHING is the general-purpose, wet flashing membrane needed for the job. This high-quality, gun grade flashing and detailing membrane by W. R. MEADOWS is low-odor, elastomeric, polyether, and compatible with the entire line of AIR-SHIELD air, vapor, and liquid moisture barriers. Perfectly designed for window and door flashing applications, AIR-SHIELD LIQUID FLASHING will not harm foam insulation. AIR-SHIELD LIQUID FLASHING is tough and versatile, able to be applied in damp conditions, bonds to most construction materials, and will not peel back when left…
HS-1 SL Now Offered in Convenient Packaging
HS-1 SL from DECK-O-SEAL is a one-part self-leveling hybrid polymer sealant developed using SMP technology designed for horizontal expansion joints in swimming pool decks, patios, and sidewalks. It has recently been rereleased in new convenient packaging, an easy to use 32-ounce pouch. Just screw on the supplied application tip and apply HS-1 SL into the joint by squeezing the foil pouch. HS-1 SL is one part and no mixing is required prior to use. It’s self-leveling qualities eliminate the need for tooling. The 32-ounce pouch can be resealed to reduce wasted product. HS-1 SL can be applied to green concrete…
Our Hawkesbury District & General Hospital (HGH) case study is now available!
Our Hawkesbury District & General Hospital (HGH) case study describes the problem and solution when the new additions to the structure were designed and built. This case study is a great way to learn more about how W. R. Meadows products were used to waterproof this large project. When the Hawkesbury District & General Hospital (HGH) decided to build two large additions to its community hospital in Hawkesbury, Ontario, Canada, construction officials knew there was a big problem to solve. Below ground level was a substrate composed of solid rock with gravel on top. That meant there was no place…
Russell Snow to Detail W. R. MEADOWS’ Air Barrier Performance at Pittsburgh Conference
W. R. MEADOWS’ Building Envelope Product Group Manager and Building Science Specialist Russell Snow will be featured in a panel discussion on liquid-applied air barriers during the one-day Materials Selection Conference in Pittsburgh on September 26. The event, hosted by Durability + Design magazine, is titled “Building Wall Coatings, Water Repellents and Liquid-Applied Air Barriers.” Snow currently serves as Chair of the Air Barrier Association of America and is a member of the ASTM E06, ASTM D08, and American Concrete Institute committees. He has also been involved for a number of years with Construction Specifications Canada and is currently involved…
Read Our “Building in Tight Urban Spaces” Article!
At W. R. MEADOWS, we’re proud to employ seasoned, experienced, educated professionals with impeccable product knowledge. Our sales team features many knowledgeable employees who have decade upon decade of experience in the construction industry. To help share this knowledge, our personnel actively write technical articles to help educate readers on several facets of the construction industry. Recently, our very own Wendy Talarico authored an article for respected trade publication, The Construction Specifier, which is the official publication for the Construction Specifications Institute. The article, entitled “Building in Tight Urban Spaces,” was featured in the August issue of the magazine. Read…
CONSTRUCT: September 13th-15th
Mark your calendar for CONSTRUCT sponsored by CSI. You won’t want to miss the one and only national trade show and educational conference from Wednesday, September 13th through Friday, September 15th at the Rhode Island Convention Center. This event brings together thousands of leaders in the commercial building construction industry that spec and source building products. Learn about real-world, practical products and education solutions for building success during this three-day event. Hear from W. R. MEADOWS’ very own Wendy Talarico, Architectural Services Specialist, who will be presenting at CONSTRUCT. Make sure to visit W. R. MEADOWS at booth # 502.…
W. R. MEADOWS hosts ABAA Installer Training Course
W. R. MEADOWS was very pleased to host an Air Barrier Association of America (ABAA) installer certification training course at our location in Hampshire, Illinois for 15 contractors from across the country. ABAA is the national voice of the air barrier industry, setting a high standard for building envelope excellence through their Quality Assurance Program. ABAA President Russ Snow is also Building Science Specialist at W. R. MEADOWS. This 3-day training program, taught by Peter Spafford, the Director of Quality Assurance from the ABAA, focused on both theory and practical instruction for self-adhered and fluid applied air barriers. The classroom…
PRECON Underslab Membrane for Waterproofing and more
When tough underslab waterproofing is needed, PRECON membrane is the product for the job. Prevent moisture infiltration, reduce methane and radon gas invasion, and create a barricade against termites with the addition of PRECON into your construction project. PRECON is made up of non-woven fabric, elastomeric membrane, and a plasmatic core that is exclusively patented by W. R. MEADOWS. PRECON offers the lowest water vapor transmission rating available with its exceptionally tough seven-layer plasmatic core. A mechanical bond is formed between cured concrete and PRECON to ensure the membrane is sealed to the concrete for long-lasting protection. PRECON is ideal…
W. R. MEADOWS Introduces CLAY-TITE Waterproofing Membrane
W. R. MEADOWS is excited to introduce the newest member of their Waterproofing Membrane line, CLAY-TITE. The addition of CLAY-TITE bentonite waterproofing membrane offers a waterproofing option that is based on bentonite clay, a first of its kind from W. R. MEADOWS. CLAY-TITE is a dual-layer waterproofing membrane consisting of virgin HDPE and sodium bentonite, and a protective layer consisting of non-woven polypropylene. The HDPE in CLAY-TITE provides the first layer of waterproofing while the bentonite’s self-sealing capabilities ensure puncture protection under hydrostatic conditions. The additional of polypropylene fabric protects the bentonite on the job site and from direct shotcrete…
W. R. MEADOWS INTRODUCES PERMINATOR® EVOH
W. R. MEADOWS is excited to announce a new product addition to its Vapor Barrier line. PERMINATOR EVOH completes the line by offering an option for a strong gas barrier membrane that is durable and efficient as part of a complete vapor barrier system in preventing contaminants in the soil from penetrating the structure. PERMINATOR EVOH’s seven-layer co-extruded barrier manufactured from state-of-the-art polyethylene and EVOH resin is specifically designed for brownfield sites. EVOH provides superior resistance to gas and moisture transmissions. PERMINATOR EVOH is a highly resilient underslab barrier designed to restrict gases, such as gasoline, solvents, oils, and hydrocarbons…
David Boyle Named President of CSC
W. R. Meadows congratulates David Boyle on his appointment to president of Construction Specifications Canada (CSC). David has been a member of CSC since 2000, obtained his CTR designation 15 years ago, and has been working his way up through the ranks ever since. David is a member of the Grand Valley Chapter and was a vital part of the resurgence of that Chapter. After taking an active role as Chapter Director for two years, he then was elected to the Executive Council as 4th Vice-President, and has moved up through the VP roles and is now President. His responsibilities…
Vanier Football Complex Case Study
When Kansas State was in need for a hot liquid tar waterproofing alternative during phase 3 of their Vanier Football Complex construction project to expand their stadium seating compacity to 50,000 seats and increase the facility to include a grand four-story atrium and state-of-the-art training rooms, W. R. MEADOWS was able to offer HYDRALASTIC 836 as a perfect solution. After the architect’s initial specifications called for a hot applied sealant, safety concerns about working with hot liquid tar arose. The architecture firm quickly signed off on switching its product plans to HYDRALASTIC 836 after it was able to meet the…
HYDRALASTIC 836 – a Superior Waterproofing Compound
HYDRALASTIC 836 is a solvent-free, cold-applied, single-component waterproofing compound ideal for use on both interior or exterior concrete surfaces, including above and below grade applications. It has a low volatile organic compound (VOC) content, has very low odor, and will not crack in extreme cold or slump due to softening at high temperatures. HYDRALASTIC 836 is excellent for positive-side horizontal and vertical applications such as waterproofing plaza decks, planter boxes, and sealing parapets, as well as waterproofing of foundations and split-slab applications. It bonds effortlessly to concrete, asphalt, wood, metal and can be applied to green concrete. HYDRALASTIC 836 does…